Ncr S16 Manual de usuario descargar pdf (Pagina 74)

SCO Release 3: Installing TCP/IP Communications

8-8 Installing SCO UNIX

6. Select your specific driver from the list and enter the corresponding

number at the prompt. If your driver is not listed, you must complete the

previous steps first.

7. When the “Add chain SCO_TCP->smpw0?” prompt displays, enter

“YES.”

8. Enter the correct internet address (IP) for this interface (192.0.0.1, for

example).

Completing the Installation

To complete the installation, follow these steps:

1. Use the default subnet mask for your chosen IP Class, or select the one

that matches your network.

2. Use the defaults.

3. At the “Verify?” prompt, enter “YES.”

4. Enter a “Local host name:”, such as “scosysv”. The “Adding host

name...” (to the /etc/hosts file) message displays.

5. At the “Host ttys?” prompt, use the defaults.

6. The TCP configuration is complete. Back at the beginning, “sco_tcp-

>smpw0” should now be listed.

7. At the “Relink kernel now?” prompt, enter “YES.”

8. At the “Boot by default?” prompt, enter “YES.”

9. Type “init 6” to shutdown and reboot; watch for errors.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 107 108

Sin comentarios

Ncr S16 Manual de usuario Pagina 74